If the light in the telephone box no longer switches on or off automatically, a reset of the motion detector can solve the problem. To do this, please disconnect the telephone box from the power supply and then proceed as follows.
📝Instructions:
Step 1
Pull the ceiling lamp out of the acoustic cushion. Please use a blunt tool for this (e.g. flat screwdriver), otherwise the textile cover may be damaged.
Step 2
Remove the white box - this is the mechanics of the motion sensor - from the cable shaft.
Step 3
Remove the mains plug from the motion detector and check that the wires are correctly inserted in the plug cover.
Step 4
Plug the mains plug back into the motion detector. Make sure that the plug is really fully inserted.
Step 5
Insert the motion detector back into the cable shaft. Please take care not to kink or pinch any cables.